Talk-X Lite

User guide. How to use every screen and key.

1Before you start

Talk-X Lite is a small, light voice app for push-to-talk radios that have buttons only (no touch needed). You choose a server, join a channel, hold the side PTT key and talk. Everything works with the keys on the radio.

ItemWhat you need
RadioAndroid 5.1.1 or newer, screen from 1.77 to 4 inches, portrait or landscape
NetworkWi-Fi or mobile data
Server detailsServer address, and the server password, nickname and channel if your server uses them

2First start

The first screen is the server list. It shows only while you are not connected.

12:00▮▮▮
Servers
My server
+ Add server
OK Connect · Menu ≡
Server list
  1. Press ▼ to select “+ Add server”, then press OK.
  2. Fill in the server (see the next step).
  3. The first time you connect, the app creates your identity. It shows a progress bar and can take 1–2 minutes on a radio. Wait; it connects by itself afterwards.

3Add a server

There are two ways. Typing on a radio keypad is slow, so the web page is usually easier.

A. On the radio

  1. Choose “+ Add server”. A form opens.
  2. Press OK on a row to type its value: Profile name · Address · Server pswd · Nickname · Channel · Channel pswd. Passwords show as dots. “—” means empty.
  3. The Address is required. Press OK to keep a value, Back to cancel it.
  4. Choose the last row, “Save & connect”.

B. From a phone or computer (web setup)

  1. On the form, choose “Add from web ›” (top row). The radio shows an address like 192.168.1.23:8080.
  2. On a phone or computer on the same Wi-Fi, open that address in a browser.
  3. Fill in the same fields and press “Save & connect”.
  4. Press Back on the radio when you are done. The web page stops by itself.
The web page needs no code and works over Wi-Fi only. It runs only while the radio shows that screen. Saved passwords are never shown again; they appear as “Set” and can only be replaced.

To change or remove a server: on the server list select it, press Menu, then choose “Edit server” or “Delete server”. Delete asks you to confirm.

4The Radio screen

After you connect, this is your main screen. It shows the server name, your channel, and what is happening.

12:00▮▮▮
My serverConnected
Channel
Lobby

Idle · 3 people here
OK · Menu ≡
Nobody is talking
12:00▮▮▮
My serverConnected
Channel
Lobby

Unit 12 is talking
OK · Menu ≡
Someone is talking
12:00▮▮▮
My serverConnected
Channel
Lobby

You are talking 0:12 / 1:00
OK · Menu ≡
You are talking (PTT held)

On screens of about 2 inches and larger, a list “In this channel” shows under the status line: the person talking in green, you last in grey.

One app, three screen sizes

The layout adapts to the screen. The app works in portrait and landscape. Bigger screens get a bigger channel name and more rows. The “In this channel” list appears from about 2 inches.

12:00▮▮▮
My serverOK
Lobby
Idle
OK · Menu
Small (1.77 inch, landscape)
12:00▮▮▮
My serverConnected
Channel
Lobby

Idle · 3 people
In this channel
Unit 12
You
OK · Menu ≡
Medium (about 2.4 inch)
12:00▮▮▮
My serverConnected
Channel
Lobby

Idle · 4 people here
In this channel
Unit 12
Unit 7
Unit 3
You
OK Connect · Menu ≡
Large (about 4 inch)

Colours and status words

You seeMeaning
GreenConnected, or someone else is talking
AmberConnecting or reconnecting. “Reconnecting… try again in N s”: press OK to try now.
RedYou are talking, or there is a problem (see “If something goes wrong”)
GreyIdle; nobody is talking

5Keys

Every screen works with keys alone. The bottom line of each screen tells you what OK and Menu do.

KeyWhat it does
▲▼Move the selection. On the Radio screen: next / previous channel.
OKSelect, switch a setting, or join
MenuOpen the menu (on a list row: a menu for that row)
BackGo back one screen. On Radio it asks “Disconnect from (server name)?”: OK = Yes, Back = No.
PTTHold to talk, on every screen
Holding ▲ or ▼ on the Radio screen changes channel slowly, one channel per second, so you do not jump through many channels by accident.

6Talking (PTT)

  1. Hold the side PTT key. A short beep tells you the radio is sending.
  2. Talk. The screen shows “You are talking” in red with the time used.
  3. Release the key to stop. A beep confirms it.
Max talk time stops very long transmissions. Change it in Settings (30, 60, 90 or 120 seconds). You can turn the beep off there too.

7Channels

Press Menu on the Radio screen, then choose Channels. Sub-channels are indented and each row shows how many people are in it.

12:00▮▮▮
Channels
Lobby★ ● 3
  Team A2
Locked 🔒0
OK Join · Menu ≡
★ = default channel · ● = where you are
  1. Select a channel and press OK to join.
  2. A channel with a lock asks for its password. “Remember” is on by default, so you type it once.
  3. To make a channel your default: select it, press Menu, choose “Set as default”, then OK to confirm. The app joins it every time you connect.

9Key lock

Lock the keys so they are not pressed by accident in a pocket or bag. PTT still works while locked.

  1. Hold Menu for 2 seconds to lock. A small lock icon appears in the title bar.
  2. While locked, other keys show “Locked · hold Menu to unlock”.
  3. Hold Menu for 2 seconds again to unlock.
A short press of Menu still opens the menu. The lock stays on when the screen turns off, and ends when you disconnect or restart the app.

10If something goes wrong

Reconnecting…

The connection dropped. The app tries again by itself, waiting a little longer each time (5 to 30 seconds). Press OK to try right now.

Server not reachable

Check Wi-Fi or mobile data and the server address. The app retries every 30 seconds. OK = try now, Back = stop and return to the server list.

Refused (wrong password, banned, nickname in use)

The server said no, so the app does not retry. Press OK to open the Edit server form and fix the password or nickname.

“Raising security level…”

The server wants a higher security level. The app raises it by itself, then reconnects. Just wait.

My keys do nothing

The key lock may be on. Look for the small lock icon, then hold Menu for 2 seconds.